The Simpluer™ panel-mounted quick connectors for luer fittings provide a fast, ergonomic, and reliable connection to your luer-equipped product for processing or testing. Simpluer Model CHA is suitable for high pressure applications and applications where a completely leak-tight seal is required. Operation is simple: Apply pilot pressure (manually or automatically) to open the face, allowing insertion of your luer fitting, then insert the fitting. Remove pilot pressure. An internal spring causes the connector to engage and seal your fitting on the ID. Run your process or test through the main port. Features: o Suitable for process pressures up to 500 psi [34 bar] o Product contact parts made from 316 stainless steel o Panel mounting with screws from rear or, with optional bracket, from front o Straight-through port allows guide wires to pass through connector o Tolerant of luer fitting misalignment; loading is quick and fool-proof o Optional O-ring seal on the luer taper o Small size o Quick & safe operation