METCAL CV-5210 Connection Validation Soldering Station

€0.00

METCAL CV-5210 Connection Validation Soldering Station View Large Image
CV-5210

METCAL CV-5210 Connection Validation Soldering Station

Metcal soldering stations have led the way with SmartHeat® technology for 35 years. SmartHeat senses the thermal load and instantly delivers Power on Demand directly to the joint. 

The embedded, self-regulating heater delivers the right amount of power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required.

The intermetallic compound thickness is critical in the formation of a solder joint. Connection Validation (CV) evaluates the quality of the solder joint by calculating the intermetallic compound formation and provides closed loop feedback to the operator. CV provides feedback to the operator via the LED light ring integrated in the hand-piece. It takes the risk associated with the variables involved in the soldering activity and removes the success and failure determination of a good solder joint out of the hands of the operator. CV complements the skill of the operator to judge the quality of a solder joint by introducing an objective method of evaluating solder joint quality. This systemic and objective approach provides repeatability and a measureable standard to the soldering process.

 



See Alternative
Title Quantity Price Availability
METCAL CV-5210 Connection Validation Soldering Station €0.00

Features:

  • SmartHeat Power on Demand Technology
  • Patented Connection Validation IMC Formation Technology
  • 2.8” color touchscreen with bold graphics
  • Communications Port for process traceability data and firmware graphics
  • Precise tip temperature display
  • Integrated Net Power Meter and power graph
  • Patented Chip-in-Cartridge technology
  • Closed loop bi-directional communication
  • Stores and records cartridge attributes
  • Provides traceability information 
  • Protects power supply from non-conforming cartridges
  • Backwards compatible with MX series power supplies
  • Password protection
Specifications:
  • Ambient Operating Temp: 10 to 40 °C
  • Input Line Voltage: 100 – 240 VAC, grounded circuitInput Line Frequency: 50/60 Hz
  • Rated Power Consumption: 125W
  • Output Power: 80W max.
  • Output Frequency: 13.56 MHz
  • Heating Method: Induction
  • Display: 2.8” Color TFT LCD Display
  • Resolution: 320*240 RGB
  • Size: 2.8” Diagonal
  • Active Area: 43.20 x 57.60 mm
  • Connections: Single Port
  • Communications: USB
  • Power Supply Dim. w x d x h (mm): 121 x 130 x 235
  • Power Supply Weight (kg): 3.35
  • Certification / Marking: CE TUV
  • Tip-to- Ground Potential: <2mV
  • Tip-to-Ground Resistance: <2ohms
  • Idle Temperature Stability: 1.1°C in still air
  • Tip Temperature Accuracy: Meets or exceeds IPC J-STD-001 Standard
  • Hand-piece cable length: L=183cm (72”), burn proof, ESD safe
  • RF Connector: F type power connector
  • LED Power Connector: 6 pin DIN
  • Operation: 2 single port or dynamic dual simultaneous
  • Firmware upgrade: Via USB port and appropriate software with compatible computer and cables.

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up