View Large Image
The Schleuniger CHM crimp height measurement system distinguishes itself from conventional hand-held units by its ease of measuring. The measurement process is much less cumbersome than hand-held units, thereby significantly reducing the time required to take the measurement. The operator can use both hands to hold the terminal in position in the lighted work area. This ensures that the terminal is positioned properly in the micrometer. The spring-loaded measuring pin ensures consistent pressure on the terminal, significantly improving consistency between operators.
Application Range
The CHM device is most commonly used for crimp height measurement on standard, non-insulated, crimp terminals. Most commonly used for B-style crimps, but others may be possible.
Technical Data
| Gauge |
Standard: Mitutoyo Digimatic, Optional: Sylvac |
| Resolution |
Standard: 0.01 mm (0.0004”) |
| Power Supply |
110/220 VAC |
| Dimensions (L x W x H) |
155 x 125 x 233 mm (6.1 x 4.9 x 9.2”) |
| CE-Conformity |
The CHM fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note |
Schleuniger recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine. |
