Techcon Systems Conditioning Cream is primarily used in the
maintenance of rotary auger valves, especially in solder paste
applications, although it can be used in other valve types.
Solder paste clogging is minimized within the feed paths as the
Conditioning Cream provides a lubricating effect within the
valve, connections and tubing.
Conditioning Cream should be used before start-up of any new
equipment or after installation of new feed tubes or connectors.
At equipment shutdown, Conditioning Cream should be used to
purge through older fluid if the equipment will not be used for 2
hours or longer. Conditioning Cream should be dispensed
through the equipment until only the blue Conditioning Cream is
seen, at the fluid outlet. Upon equipment restart the fluid should
be dispensed through until only the application fluid is seen at
the equipment outlet.